基于负序电流补偿的并联风电变流器故障容错控制

海上风电运行环境恶劣,风电功率随机波动性大,导致功率器件极易发生故障.故障容错控制是提高风电并联变流器运行可靠性以及功率可用度的有效手段.并联风电变流器某相发生开路故障后,对并联风电变流器的故障运行机理进行了详细分析.在此基础上,提出一种基于负序电流补偿的并网风电变流器故障容错控制,利用非故障变流器模块对故障变流器模块进行负序电流补偿.当系统功率小于或等于0.5 p.u.时,在保证并网侧电流平衡的条件下实现变流器最大输出功率;当系统功率大于0.5 p.u.时,首先满足系统有功输出要求,然后对负序电流进行补偿.最后通过仿真验证了该控制理论的正确性与可行性.     

Denaturing gradient gel electrophoresis analyses of microbial community from field-scale composter

The diversity of microbial community during the decomposition of waste in a field-scale composter (Hazaka system) was investigated by denaturing gradient gel electrophoresis (DGGE). The composter operates at a high temperature through a self-heating system, creating a thermophilic (60-76 degrees C) stage during the initial phase and a mesophilic (45 degrees C) stage towards the later phase of the composting period. The pH of the system (pH 7.75-8.10) did not vary significantly during the process while moisture content was reduced from 48.8% to 25.1%. DGGE and 16S rDNA analyses showed that the following genera were found throughout the process: Propionibacterium sp., Methylobacterium sp., Pseudomonas sp., and Bradyrhizobium sp. Different Bacillus spp. thrive at the thermophilic or the mesophilic stage while Clostridium sp. was only found at the initial phase of the process. Staphylococcus sp. and Caulobacter sp. or Brevundimonas sp. existed during the later phase of the composting period.     

Protein-conjugated acrolein as a biochemical marker of brain infarction

The relationship between acrolein (CH(2) =CH-CHO) and brain infarction is the focus of this review. It has been found that acrolein is produced mainly within cells from polyamines by polyamine oxidases (PAOs), especially from spermine by spermine oxidase during cell damage, and that acrolein is more toxic than reactive oxygen species (ROS) in a cell culture system. Thus, the possibility that acrolein and PAOs are good biochemical markers of stroke was tested because there are no other reliable biochemical markers at the early stage of stroke. Levels of protein-conjugated acrolein (PC-Acro) and PAOs (acrolein-producing enzymes) were significantly increased in the plasma of stroke patients. The multiplied value of PC-Acro by PAOs was nearly parallel with the size of stroke. Furthermore, when the combined measurements of PC-Acro, interleukin-6 (IL-6) and C-reactive protein (CRP) were evaluated along with age using a receiver operating characteristic (ROC) curve, even silent brain infarction (SBI), which is a small brain infarction, was indicated with approximately 84% sensitivity and specificity. These findings clearly indicate that acrolein is strongly correlated with cell damage during brain infarction.     

Effect of internal curing by using superabsorbent polymers (SAP) on autogenous shrinkage and other properties of a high-performance fine-grained concrete: results of a RILEM round-robin test

The article presents the results of a round-robin test performed by 13 international research groups (representing fifteen institutions) in the framework of the activities of the RILEM Technical Committee 225-SAP “Applications of Superabsorbent Polymers in Concrete Construction”. Two commercially available SAP materials were used for internal curing of a high-performance, fine-grained concrete in combination with the addition of extra water. The concrete had the same mix composition in all laboratories involved but was composed of local materials. All found a considerable decrease in autogenous shrinkage attributable to internal curing. Also, with regard to the shrinkage-mitigating effect of both particular SAP materials, the results were consistent. This demonstrates that internal curing using SAP is a robust approach, working independently of some variations in the concretes’ raw materials, production process, or measuring technique. Furthermore, the effects of internal curing on other properties of concrete in its fresh and hardened states were investigated. These are consistent as well and expand considerably the existing data basis on properties of concrete materials containing SAP.     

Strain and thermal expansion coefficients of various cement pastes during hydration at early ages

Cement pastes undergo elevated temperature histories due to hydration heat liberation at early ages. Thermal expansion coefficients of cement paste and concrete change with age, showing a decrease after mixing, a subsequent minimum and then a gradual increase. These changes contribute to thermal strain. In this study, effects of water–cement ratio and cement type on volume changes in early-age cement pastes were experimentally examined using a newly developed apparatus capable of simultaneously determining both thermal expansion coefficient and total strain of cement pastes. The dependence of the thermal expansion coefficient on hydration was affected by water–cement ratio, cement type, elevated temperature history and particularly by the free water content of the cement pastes, while the relationship between thermal expansion coefficient and free water content varied with water–cement ratio. A notable increase in thermal expansion coefficient at early ages was observed when water–cement ratio was low and alite content in cement was high. At a water–cement ratio of 0.30, low-heat Portland cement paste resulted in a small total strain while moderate-heat and ordinary Portland cement pastes showed larger strains. Because no particular difference was observed in the thermal strains, shrinkage in the low-heat Portland cement paste was attributed to autogenous strain. At a water–cement ratio of 0.40, self-desiccation had a significant influence upon autogenous shrinkage and dependence of thermal expansion coefficient on hydration, and the effect of the mineral composition of cements was notable. However, for cement pastes with a water cement ratio of 0.55, no significant effects of self-desiccation were observed, probably because considerable excess water was present.     

Formation characterization of hydroxyapatite on titanium by microarc oxidation and hydrothermal treatment

Microarc oxidation (MAO) was performed on titanium in an electrolyte containing calcium glycerphosphate (Ca-GP) and calcium acetate (CA) using a direct current power supply. It was found that the MAO method is suitable forming a ceramic coating containing Ca and P using titanium, and that films display a porous and rough structure on their surface. Samples with a Ca/P ratio of 1.71 were hydrothermally treated in water solution whose pH was adjusted to 7.0-11.0 by adding NaOH at 190 degrees C for 10 h in an autoclave. Hydroxyapatite crystals were precipitated on the film surface after the hydrothermal treatment, and the amount of hydroxyapatite precipitated increased with increasing pH of water solution. The oxide film composition was semiquantitatively analyzed with an electron probe microanalyzer. The microstructures on the sample surfaces were observed by scanning electron microscopy before and after the hydrothermal treatment. The topography of the oxide film was imaged with an atomic force microscope. Its cross section was observed by scanning electron microscopy after being coated with a thin Au film. The surface structures of the films were analyzed by X-ray diffraction.     

Influence of mix proportions and curing conditions on tensile splitting strength of high strength concretes

The effect of the composition of high strength concretes with low water to binder ratio and silica fume on the development of splitting tensile strength was studied. A statistical approach was employed to develop formulation which could adequately describe the relations between splitting tensile strength and the concrete composition, when cured in two different regimes: water curing at 20°C and sealed curing at 30°C. Autogenous shrinkage was induced in the second type of curing but was largely eliminated in the first one. The relations were presented as nomograms which could be used as a basis for mix design. The correlation between tensile splitting strength and compressive strength could not be described in terms of a simple linear relation with a characteristic constant. For the range of variables studied, the ratio between tensile and compressive strength varied over a large range of 0.08 to 0.12. As a result, the relations developed here for tensile strength are quite different in nature than those for compressive strength in a previous study. Analysis of the data suggest that tensile strength is sensitive to effects which induce autogenous shrinkage to a much greater extent than compressive strength. It is proposed that this may be the main reason for the different trends observed for the relations between the composition of the low water/binder ratio concretes and their compressive and tensile strength.     

EvIcon: Designing High-Usability Icon with Human-in-the-loop Exploration and IconCLIP

Interface icons are prevalent in various digital applications. Due to limited time and budgets, many designers rely on informal evaluation, which often results in poor usability icons. In this paper, we propose a unique human-in-the-loop framework that allows our target users, that is novice and professional user interface (UI) designers, to improve the usability of interface icons efficiently. We formulate several usability criteria into a perceptual usability function and enable users to iteratively revise an icon set with an interactive design tool, EvIcon. We take a large-scale pre-trained joint image-text embedding (CLIP) and fine-tune it to embed icon visuals with icon tags in the same embedding space (IconCLIP). During the revision process, our design tool provides two types of instant perceptual usability feedback. First, we provide perceptual usability feedback modelled by deep learning models trained on IconCLIP embeddings and crowdsourced perceptual ratings. Second, we use the embedding space of IconCLIP to assist users in improving icons' visual distinguishability among icons within the user-prepared icon set. To provide the perceptual prediction, we compiled IconCEPT10K, the first large-scale dataset of perceptual usability ratings over 10,000 interface icons, by conducting a crowdsourcing study. We demonstrated that our framework could benefit UI designers' interface icon revision process with a wide range of professional experience. Moreover, the interface icons designed using our framework achieved better semantic distance and familiarity, verified by an additional online user study.